 |
 |
 |
| 1. Push the coupling onto the pipe or fitting until the end touches the middle ring of the rubber gasket. | 2. Insert the next pipe or fitting into the coupling. | 3. Tighten the screws alternatly with hexigonal screw driver, power drill or spanner. |
Homepage:www.chungwing.com
Contact:
cwfinfo@chungwing.com
Address:
Ground Floor, 12 Beech Street, Tai Kok Tsui, Kowloon, Hong Kong
Tel:
(852)2392 2580, 2392 9050 Fax:
(852)2787 2933